Whether you are in a brand new home or in a much older one, there are probably quite a few minor home electrical repair works that could use some attention. Some problems of course will need a professional, whereas others can be addressed by almost anyone with a screwdriver and a little elbow grease. Electrical repairs are known to be quite dangerous, but there are a few tasks and quick fixes that are completely safe and simple to follow. These quick fixes can not only save you on costly repairs, but they will also help you identify any further problems that may require professional assistance from a professional electrical repair company like Mister Sparky in Huntsville, Alabama.
Not Enough Outlets
While most modern homes will feature far more outlets than older homes which usually only have one or two outlets within a room. A low cost, quick fix that does not require any home electrical repair is extension cords and power strips. Any cords and cables you use should be able to safely handle most electrical loads you place on them. To ensure this, use a lower number gauge for your cords and power strips, such as 14-gauge cable. The lower the gauge, the thicker the cable will be.
However, extensions and power strips can become unsightly. For private rooms or areas in the home that does not have much traffic, extension cords and power strips may be ideal. In areas of your home that are quite frequented you may want to have additional electrical outlets installed. New receptacles should only be installed by a qualified and licensed electrician to ensure that your home’s electrical wiring remains up to code and the home electrical repair is done safely.
Another minor problem with outlets requires you to actually take a quick look at first. Some outlets are installed with wires pushed into slots in the back of the receptacle. There isn’t anything wrong with this type of outlet, however, vibration, heat expansion, and aging can cause these connections to slide out of place over time. To fix this, pull the wire free of the terminal and use a more traditional screw-terminal for added convenience.
Plugs Fall Out of Existing Outlets
As electrical items are pulled in and out of sockets over the years, the electrical sockets will age, and the metal contacts will loosen due to repeated use. This becomes an obvious problem whenever plugs slide out of the sockets simply because of gravity. This can often lead to incomplete connections, electronics being cut off and failed charges for phones or batteries. Another problem is that these loose connections can lead to excess carbon build-up inside of the socket due to the arcing between the contacts. This is a possible safety hazard and for these reasons alone, you should have the outlet replaced.
Replacing an outlet is much easier than installing a new one and it can typically be done with a simple technical guide and just a handful of tools. This will also be beneficial, as there are so many USB-powered devices nowadays; replacing your outlet with a newer one will be the opportune time to upgrade the outlet to one which includes a few USB ports.
Whenever the wattage of a bulb exceeds the maximum rating for a fixture you are faced with a problem that is more commonly known as overlamping. While your home may be fully capable of handling the higher wattage demanded by the bulb, if your fixture or socket is not rated for the power being drawn by the bulb, it can overheat leading to burnt insulation or even a melted socket. Overlamping is dangerous and because of this it is a code violation and something that you should have fixed immediately. If you have one or more fixtures and or sockets in your home that seems to be getting excessively warm, you should inspect the wattage rating for those components to make sure that they are not overlamping.
The cheapest and quickest way to fix an overlamping problem is by replacing the bulb in the fixture with a bulb that meets the capabilities of the fixture or socket. If the fixture makes use of multiple light bulbs, ensure that the total wattage of all the bulbs is lower than the maximum rating of that fixture. However, if you are keenly set on certain wattage, then you should replace the existing fixture or socket with one that is capable of handing the increased electrical draw. You can also switch to more energy efficient light sources such as CFLs or LEDs. As long as the total wattage consumed does not exceed the rating for your fixture, you will be fine.
Flickering lights can be caused by multiple issues, some of which are quite simple to fix while others require home electrical repair. Some of the more common problems are listed below:
Defective or Old Fluorescent Ballast – A fluorescent ballast regulates the electrical voltage or amount of current that travels to your lights. As the ballast ages, it becomes less efficient at providing this, which will lead to lights flickering and the decrease of the lamp-life.
Faulty Switches – Loose light switches or dimmers can create incomplete connections or faulty current flow to your home’s lights. If you use incandescent lights, a faulty switch is typically the reason and you will need home electrical repair to rectify it.
Unprofessional Wiring – Flickering lights can also be a sign of faulty wiring or loose terminal connections that will require home electrical repair. If the source of the flickering lights is not apparent, it is best to hire a professional electrician to examine your home’s wiring to ensure that there is not some other damage or loose electrical connections. Unprofessional, faulty wiring is dangerous and it should be dealt with as soon as possible.
- Bad Wiring – Flickering lights can also be a sign of faulty wiring or loose terminal connections. If the source of the flickering lights is not readily apparent, it’s best to get an electrician to examine your home’s wiring to make sure there isn’t some other damage or loose electrical connection at fault. Bad wiring is dangerous and should be dealt with as soon as possible.
About Mister Sparky in Huntsville, Alabama
Mister Sparky was founded in Atlanta, Georgia in 1996. The original location in Atlanta, Georgia is now one of the leading residential electrical service and repair companies in the entire Eastern United States and is also one of the biggest nationwide. Mister Sparky has a superior record for delivering fast, on-time service, accurate upfront pricing with an overall professional and pleasant experience for customers who are looking for home electrical repair.
At Mister Sparky we differentiate ourselves from our competition by our unique message: Mister Sparky – “America’s On-Time Electrician.” Out mottos is, We’re On Time, You’ll See, Or The Repair is Free. And we mean it. In fact, Mister Sparky is the “On-Time” contractors in the electrical field and we are leading the pact with superior service nationwide. Mister Sparky has over 86 locations nationwide and we are growing tremendously each and every year. With honest and professional service that simply gets the job done; time after time again you count on Mister Sparky providing you with professional and prompt home electrical repair.
No matter what type of electrical problems you are having if you need home electrical repair, you can rely on Mister Sparky to deliver professional and prompt service. All of our electricians are well-trained, vetted and can resolve any electrical issue in a prompt, professional and accurate manner. If you need home electrical repair, you can rest assure knowing that you are in good hands with Mister Sparky. For your convenience we are available three hundred and sixty five days a year and twenty four hours a day for emergency services. When you use Mister Sparky for your next electrical problem, installation or maintenance needs, you cannot go wrong.